Slag Hog
Quickly and easily remove tough slag and dross buildup from your laser support surface. The Slaghog™ works on Copper as well as Steel support slats and can be operated on the unused laser bed while the machine is running. Perform cleaning from one side of cutting bed with a single operator.
Two versions are available for either standard or narrow slat spacing.
Standard Slaghog™ ID: 66100
Narrow Slaghog™ ID: 66132
Both versions are physically similar with the Standard Slaghog™ having larger diameter cutters and the Narrow Slaghog™ having smaller 1 inch cutters to fit between narrow spaced slats.
Two versions are available for either standard or narrow slat spacing.
Standard Slaghog™ ID: 66100
Narrow Slaghog™ ID: 66132
Both versions are physically similar with the Standard Slaghog™ having larger diameter cutters and the Narrow Slaghog™ having smaller 1 inch cutters to fit between narrow spaced slats.
- Slat Cleaning can be performed on unused bed during machine operation
- Cleans a standard bed in approximately 15 min
- For use on most manufactures laser machines
- Dual cutters lift slag from both sides of the slats. Changing the cutters accommodates different slat thicknesses.
- Simple to start and stop: may be turned on or off at motor box or end of handle.
- Resettable over-current protection
- Integrated wheels allow for quick use when placing on machine
- Stores in upright position
